HOGI cnc 4-Roller plate rolling machine 4-roller plate rolling machine
HOGI CNC 4-Roller Metal Plate Rolling Machine
HOGI specializes in the production of customized automatic rolling equipment, intelligent welding equipment, and customized processing production lines
Fan HVAC complete sets of welding equipment, angle steel flange automatic welding, electromechanical pipeline welding equipment
The machine is fully hydraulic drive, digital control, the whole machine structure is advanced, superior performance, high efficiency, in the international and domestic industry are in the leading level.
Our CNC hydraulic four-roller plate rolling machine has features:
1. Side rollers swing in a straight line with good pre-bending effect.
2. The pressure roller and both side rollers adopt hydraulic distribution valve and displacement sensor to ensure synchronicity.
HOGI industrial fan HVAC complete set of welding equipment angle steel flange automatic welding, Rolling production line
HOGI develops, designs, manufactures and sells intelligent welding, cutting and Rolling equipment in the fields of ventilation and environmental protection engineering, fire protection, heating, cooling and ventilation fans.
Realisation of automatic, intelligent and parametric production
HOGI fan HVAC complete sets of welding equipment Angle steel flange automatic welding, electromechanical pipeline welding equipment rolled round production line.
HOGI CNC Hydraulic 4-roller Plate Rolling Bending Machine
Fan HVAC complete sets of welding equipment
Angle steel flange automatic welding
Electro mechanical pipeline welding equipment
Duct coil rolling welding automatic production line
HOGI specializes in the production of customized automatic rolling equipment, intelligent welding equipment, and customized processing production lines
The machine is fully servo-driven, digital control, advanced structure of the machine, superior performance, high efficiency.
HOGI Full servo motor drive CNC 4-roller plate rolling machine has Features:
1、Full servo drive, high efficiency and energy saving (drive power is equivalent to 60% of the traditional), rolling work is safer and more reliable than other types of rolling machines.
2、Permanent lubrication technology (no need to refuel the bearings during the life of the bearings, they have been refilled at the factory)
3, adjustable clamping pressure (no slippage, productivity is 2-3 times higher than 3-roller plate rolling machine), the clamping force of the plate between the upper and lower rollers can be set by the servo motor torque force through the numerical control system to adjust the pressure value required for rolling plates of different thicknesses and widths.
4, can be rolled on the roll diameter 1.5 times the cylinder, the end of the rolled sheet pre-bending straight edge length is smaller than other types of rolling machine.
Model | W12HG-1.5*1300mm |
Upper Roller Diameter | ∅72mm 42CrMoForged parts |
Lower Roller Diameter | ∅90mm 42CrMoForged parts |
Side Roller Diameter | ∅80mm 42CrMoForged parts |
Material | Cold Plate, Stainless Steel |
Processing Range | 0.5~1.5（Cold Plate） 0.5~1.0（Cold Plate） |
Maximum thickness of rolled plate | 1.0 |
Maximum pre-bent plate thickness | 1.0 |
Maximum width of rolled plate | 1250mm |
Work roll drive type | Full servo drive |
Sheet yield limit | ≦245 Mpa |
Rolling speed | About 10m/min |
Prebend remaining straight edge | ≦1.0 Thickness |
Minimum roll diameter at full load | ∅85mm （Cold plate 0.8） ∅100mm （Stainless steel 0.95） |
Total power | 4.2KW |
HOGI CNC Hydraulic CNC 4-roller Rolling Machine
Main technical parameters:
Model | HGW12NC-6×1500mm |
Upper Roller Diameter | Φ150 ㎜ 42CrMo Forged parts |
Lower roller diameter | Φ150 ㎜ 42CrMo Forged parts |
Side Roller Diameter | Φ130 ㎜ 42CrMo Forged parts |
Material | Stainless steel,Carbon Steel |
Processing Range | 0.8~6 |
Maximum thickness of rolled plate | 6 |
Maximum pre-bent plate thickness | 6 |
Maximum width of rolled plate | 1500 ㎜ |
Work roll drive type | Hydraulic motor drive for upper rollers |
Sheet yield limit | ≤245Mpa |
Coiling speed | about 3~6m/min |
Prebend remaining straight edge | ≤1.5 plate thickness |
Minimum roll diameter at full load | Φ250mm |
Total power of the machine | 4KW |