The advantages of all electric servo cnc bending machine compared with hydraulic cnc bending machine:

This purely electric control mode through a large number of data to determine its power consumption is only 25% of the traditional electro-hydraulic CNC bending machine, energy saving effect is more prominent. And the entire working process without hydraulic oil.

Fundamentally eliminating the problem of waste oil and liquid pollution, more environmentally friendly.

Pure electric servo CNC bending machine fast and slow speed conversion and positioning of the lower dead center are controlled by servo motors and screws, the control of the entire cycle than the hydraulic control of the bending machine faster, the efficiency can be increased by nearly 2 times, and the hydraulic control of the bending machine with the rising oil temperature accuracy control is prone to be affected, the pure electric servo bending machine through the servomotor-driven ball screw movement, this drive does not produce high Thermal effect, suitable for long-term high-precision operation.

In short, compared with the traditional hydraulic control bending machine, energy saving and environmental protection, high efficiency and high precision is its outstanding advantages.

Main accuracy index:

Slider positioning accuracy Y1, Y2 ±0.01 mm
Repeat positioning accuracy of slider Y1, Y2 ±0.01 mm
Angular tolerance of bending workpiece: ±20’/full length
Bending workpiece straightness tolerance: 0.20mm/1000mm
Repeat positioning accuracy of X-axis of backstop: ≤±0.01mm
Repeat positioning accuracy of R-axis of backstop: ≤±0.02mm

HOGI All electric servo CNC Press brake machine

HOGI Full 100% Electric Servo Control CNC bending machine

The advantages of all electric servo bending machine compared with hydraulic bending machine:

Special power saving: The difference in power consumption between all-electric servo bending machines and electro-hydraulic servo bending machines, such as the difference between inverter air conditioners and ordinary air conditioners, all-electric servo bending machines automatically output appropriate power and energy according to working conditions, and the power consumption is less than when idle 0.5kW, so it is particularly power-saving.

Green and environmental protection: No need to use and replace hydraulic oil, which stops the environmental pollution caused by waste hydraulic oil.

Fast slide speed, high production efficiency

High bending accuracy   Low maintenance cost

Model:

Tab Content