Function and introduction of combined punching and shearing machine
Classification description
The combined punching and shearing machine is a kind of machine tool equipment that combines metal cutting, punching, shearing, bending and other functions. It has the advantages of simple operation, low energy consumption, and low maintenance cost. It is a modern manufacturing industry (such as: Metallurgy, bridges, communications, electric power, military and other industries) metal processing equipment of choice.
There are two types of combined punching and shearing machines: hydraulic Ironworker machine and mechanical combined punching and shearing machines, of which hydraulic type is the most widely used. The combined punching and shearing machine is generally suitable for processing small workpieces, and can work in multiple stations at the same time. The left foot switch individually controls the punching station, and the right foot switch controls the operation of other jobs at the same time.
Applicable place
The combined punching and shearing machine is widely used in:
- Steel structure processing
- Elevator car and parts processing
- Trailer-spare tire parts, trailer hinges, hooks, inserts, wall plates
- Construction machinery industry-processing on belt conveyors and mixing stations
- Agriculture and animal husbandry machinery industry-threshing frame body, trailer body parts processing
- Food industry machinery-slaughter equipment frame and parts processing
- High and low voltage tower parts processing
- Wind power equipment-parts processing on the stairs and pedals on the wind power tower
- Machining-processing of building embedded parts, conveyor brackets and other parts that play a role in connection
- Grain machinery-grain and oil equipment, starch equipment support, shell, small parts processing
- Processing of railway wagons, automobiles and crane parts
- Channel steel, square steel, round steel, H steel, I-beam and other steel cutting, punching, bending.
Features
The punching function is located at the left station of the combined punching and shearing machine, and is controlled by the left foot switch. By changing different upper and lower molds, holes of different sizes and shapes can be punched. Each set of die has a certain life time, and the die needs to be replaced after the service life is exceeded. If the punching and shearing machine model is Q35Y-20, 20 is the maximum shearing thickness of 20mm.
The louver punching station is shared with the punching station, and the upper and lower molds need to be replaced at the same time.
The bending station is shared with the punching station, and the upper and lower molds need to be replaced at the same time.
The angle steel cutting station is used to cut the angle steel as shown in the figure below. For the specific cutting size, please refer to the parameter table.
Channel steel cutting is beside the angle steel cutting station, and the specific cutting channel steel size needs to refer to the parameter table.
Round steel square steel cutting and cutting channel steel share the same station, but only one of the two can be selected. If the round steel square steel cutting function is selected, the channel steel cutting function cannot be selected.
Steel plate cutting is equivalent to the function of a shearing machine, which is used to cut small steel plates. The specific cutting size needs to refer to the parameter table.
